The Earth Bond Test verifies the integrity (continuity) of the protective bonding of the equipment (Class I equipment) designed to secure safety through the basic insulation and protective earthing. It is also called earth (ground) bonding test. In the Earth Bond Test, a current in the range of 10 A to 60 A is applied for 60 seconds to few minutes. The resistance is measured by measuring the voltage. The test current is determined by the rating of the distribution system (such as 1.5 or 2 times the distribution system). Many standards define the resistance limit to less than or equal to 0.1 O (some standards define the limit by the voltage drop) and the open-circuit voltage (no-load voltage) to less than or equal to 6 V or 12 V. If the continuity of the protective bonding is confirmed, we can conclude that the equipment has the requirements for preventing electric shock even if the insulation between the primary circuit and the accessible conductive section fails and a fault current flows through the distribution system. Please Contact Us for more information. Recommended Products TOS6200 [30A] Earth Bond Tester Test current value: 3 to 30 A AC / Resistance value: 0.001 to 1.200 Ohm Stores 100 test conditions in memory Incorporates test conditions into program Contact Check function Equipped with standard GPIB and RS-232C interfaces TOS6210 [60A] Earth Bond Tester Supporting UL60950-1 Test current value: 6 to 60 A AC / Resistance value: 0.001 to 0.600 Ohm Stores 100 test conditions in memory Incorporates test conditions into program Contact Check function Equipped with standard GPIB and RS-232C interfaces Related Products AC/DC, Withstanding Voltage Tester Insulation Resistance Tester Voltage and Insulation Resistance Tester Leakage Current Tester	Telonic Instruments limited are specialists for Test and Measurement Equipment, laboratory Power Supplies, Safety Test Instruments, RF Filters and Attenuators. Kikusui Electronics Corporation is a high quality manufacturer of AC & DC Laboratory Power Supplies, Electronic Loads and Safety Test Equipment. Hire Option is a UK based rental company specializing in AC & DC Laboratory Power Supplies, Electronic Loads and Safety Test Equipment. Digimess Direct is a low cost supplier of Test and Measurement Instruments.
Telonic Instruments Ltd © - Telephone: +44(0)118 9786911 Fax: +44(0)118 9792338 E-mail: info @ telonic.co.uk
Flash Test | Earth Bond Tester | Leakage Current Testing | IEC60990 | Insulation Resistance Tester | Flash Tester Hipot Testing | Leakage Current Tester | Earth Continuity Tester | Electrical Safety Testers | Flash Testing | Leakage Current Testers
Kikusui earth bond testers and earth bond testing equipment available in the UK from electrical safety testing specialist Telonic instruments. Earth bond testing, leakage current testers, earth bond tester, earth bond testers, electrical safety testers, flash testers, hipot testers, high voltage insulation resistance testers, 60950-1, telonic, kikusui.